透射电镜像转角的测定及应用

论述了完全标定透射电镜像转角所需拍摄的二次曝光电子显微像的数量,推导了由已测的像转角间接计算其它像转角的一般公式,以Philips Cm200电镜为实例,说明了测定像转角的基本步骤,并以实例说明怎样利用像转角,把衍射花样的晶体学信息传递给电子显微像。     

Sulfide Gels and Films: Products of Non-Oxide Gelation

The preparation of concentrated sols and transparent stiff gels of II-VI semiconductors nanocrystals is reported. A two-step process for the production of cadmium sulfide is reported. Sol stabilization and gelation control are achieved through successive passivation and depassivation of the surface of the nanocrystals which are complexed with thiols. The mechanisms driving the aggregation and the gelation are explained on the basis of NMR and SAXS experiments. Thin films as well as monoliths can be produced. The general principles of the method presented are not restricted to chalcogenide systems and thus enlarge the domain of application of the inorganic sol-gel process.     

Characterization of proteins separated by displacement chromatography using low angle laser light scattering photometry

Summary -Lactoglobulin A and B (-LACT) were separated by displacement chromatography (DSC) on an ionexchange column using dextran sulfate as the displacer. A LALLS photometer and a UV detector, in series, were used to determine the molecular weight (MW) of the proteins, on-line. The results indicate that both, -LACT A and B, were present as dimers in the buffer used for the mobile phase. The MWs of the proteins were about 6–8% higher than the theoretical MW of a dimer (37,000). Additional control studies have shown the presence of a high molecular weight species in both the proteins, which could possibly be an aggregate. This species was observed in the LALLS signal but was nearly absent in the UV signal. Our work has demonstrated the feasibility of interfacing LALLS with displacement chromatography for detecting impurities or aggregates which may be difficult to detect by conventional detectors used for chromatography.     

Surface properties of Reactive Yellow 2 immobilised pHEMA and HEMA/chitosan membranes: characterisation of their selectivity to different proteins

Poly(hydroxyethyl methacrylate), pHEMA, and a composite pHEMA/chitosan networks were synthesized in the membrane form via UV initiated photo-polymerisation in the presence of an initiator ,′-azoisobutyronitrile. Reactive Yellow 2 (RY-2) was covalently immobilised as a dye–ligand onto both membranes. The polarity and surface energy of the investigated membranes were determined by contact angle measurement. The incorporation of chitosan in the pHEMA networks produced more hydrophilic surface, as indicated by contact angle analysis. The binding characteristics of lysozyme, γ-globulins, human serum albumin (HSA) and bovine serum albumin (BSA) to pHEMA-RY-2 and pHEMA/chitosan-RY-2 affinity membranes have been investigated from aqueous solution and their dye–ligand free forms were used as control systems. When chitosan was incorporated in the pHEMA network as a cationic polymer led to higher adsorption capacity for the lysozyme. Selective adsorption behaviour was also observed in the case of pHEMA/chitosan-RY-2 membrane for the lysozyme. The non-specific adsorptions of the lysozyme on the pHEMA and pHEMA/chitosan membranes were about 1.9 and 7.2 mg/ml, respectively. These were negligible for all others investigated proteins. The lysozyme adsorption data was analysed using the first-order and the second-order models. The first-order equation in both affinity membrane systems is the most appropriate equation to predict the adsorption capacities of the adsorbents. The adsorption isotherms well fitted the combined Langmuir–Freundlich model. A theoretical analysis has been conducted to estimate the thermodynamic contributions (changes in enthalpy, entropy and Gibbs free energy) for the adsorption of lysozyme to both dye–ligand immobilised membranes. The adsorption capacities of both dye–ligand immobilised membranes increased with increasing the temperature while decreased with increasing the NaCl concentration. Both affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated separation–elution cycles.     

RELATIONSHIPS BETWEEN X—H STRETCHING OVERTONE FREQUENCIES AND BOND LENGTHS/BOND ANGLES

A relationship between the X-H (X = N, O, C, and so on) equilibrium bond length in a Morse oscillator and the X-H stretching overtone frequency shifts is obtained theoretically. We use the equation to discuss the empirical linear relationships that have been proposed for heterocyclics, alkanes and fluorinated benzenes. On the other hand, a unified relationship between the X-H bond angles and the experimental quantities (ω(?) and the coupling strength λ) is also presented for XH2, XH, and XH4 molecules or molecular fragments. Calculations of X-H bond angles for a number of molecules show that the results from our equations are in excellent agreement with the experimental values. Also we can extract the information of relative magnitude of bond coupling force field.     

A method for correcting the contact angle from the θ/2 method

The θ/2 method, a widely used technique on measuring the contact angle of a sessile drop, assumes that the drop profile is part of a sphere. However, the shape profile of a sessile drop is governed by the Young–Laplace equation and is different from a sphere, especially for drops with a large bound number (e.g. large volume or small surface tension). The spherical assumption, therefore, causes errors on evaluating the contact angles. The deviation of contact angle from the θ/2 method is evaluated from a theoretical calculation in this work. A simple means is given for correcting the measurement error. The corrected angle results from the drop volume, surface tension, liquid density and the contact angle from θ/2 method. An algorithm for finding the correct contact angle without knowing the density and surface tension is also given. At the end, two examples of pendant drops are given for the illustration.     

Effect of Artabotrys odoratissimus extract as an environmentally sustainable inhibitor for mild steel corrosion in 0.5 M H2SO4 media

Artabotrys odoratissimus inhibitory effect on mild steel (MS) corrosion in 0.5 M H₂SO₄ solution has been assessed utilizing mass loss, electrochemical potentiodynamic polarization, and impedance spectroscopy techniques. The Artabotrys odoratissimus plant has a wide range of bioactive compounds. Phytochemicals were tested for ethanolic Artabotrys odoratissimus leaves extract (AOLE) using the FeCl₃ test, Salkowaski's test, and others. Corrosion tests were conducted at varying inhibitor concentrations and temperatures. The inhibitory impact of AOLE on corrosion of MS was reported to improve with increasing concentration. Polarization experiments revealed that AOLE is a mixed kind of inhibitor and the inhibition efficacy (η_w) for MS is 93.27% for 1.25 g/L AOLE. For Electrochemical impedance spectroscopy (EIS), maximal inhibitory efficacy (η_w) was 91.62% due to AOLE adsorption on the MS surface. The obtained results using each methodology are highly consistent and closely resemble each other. The adsorption of AOLE molecules on an MS surface from the bulk of the solution causes the inhibitor's inhibition action, and the adsorption mechanism follows Langmuir adsorption isotherm. The computed $\Delta G_{ads}^o$ values ranged between ?32.919 and ?33.520 kJ mol^?1, implying a spontaneous and exothermic inhibitory action. The thermodynamic and activation parameters are often used to understand corrosion inhibition mechanisms. The comparison of corrosion product and pure extract FT-IR spectrum indicates the nature of AOLE adsorption on the MS surface. The surface morphology of MS samples was assessed using atomic force microscopy (AFM), scanning electron microscope (SEM), and contact angle techniques.     

SiO_2粒子对PMMA/SAN共混体系相分离行为的影响

采用小角激光光散射(SALLS)并结合动态流变学方法,考察了气相法二氧化硅(SiO2)粒子的加入对聚甲基丙烯酸甲酯/苯乙烯-丙烯腈无规共聚物(PMMA/SAN)共混体系相行为的影响,得到了添加SiO2粒子前后的相图,发现SiO2粒子对基体相行为的影响与基体的组成有关.对PMMA/SAN(60/40)体系,加入SiO2粒子后相分离温度上升,但并未改变相分离机理,仍为亚稳单相分解过程(spinodal decomposition,SD);而对于PMMA/SAN(30/70)体系,加入SiO2粒子后却降低了体系的相分离温度.该现象可能是SiO2粒子和基体组分界面间组成与PMMA/SAN共混物基体组成的差异造成的.     

Coordination around thorium(IV) in aqueous perchlorate,chloride and nitrate solutions

The coordination around the thorium(IV) ion in aqueous perchlorate, chloride and nitrate solutions has been determined from large angle X-ray scattering measurements. In perchlorate solutions, where inner-sphere complexes are not formed, the first coordination sphere contains 8.0±0.5 water molecules with Th-H₂O bond lengths of 2.48₅ Å. In chloride solutions inner-sphere complexes are formed, which lead to an increase in the coordination number. In nitrate solutions the nitrate ions are bonded as bidentate ligands to the thorium ion. The bond lengths are similar to those found in crystalline hydrates of thorium nitrate. The coordination numbers found for thorium(IV) in solution are compared with previously reported values for lower charged ions of similar size.On leave from Department of Inorganic Chemistry Royal Institute of Technology S-10044 Stockholm Sweden     

Structure determination of zinc iodide complexes formed in aqueous solution

Structures of the complexes formed in aqueous solutions between zinc(II) and iodide ions have been determined from large-angle X-ray scattering, Raman and far-IR measurements. The coordination in the hydrated Zn²⁺ hexaaqua ion and the first iodide complex, [ZnI]⁺, is octahedral, but is changed into tetrahedral in the higher complexes, [ZnI₂(H₂O)₂], [ZnI₃(H₂O)]^– and [ZnI₄]^2–. The Zn-I bond length is 2.635(4)Å in the [ZnI₄]^2– ion and slightly shorter, 2.592(6)Å, in the two lower tetrahedral complexes. In the octahedral [ZnI(H₂O)₅]⁺ complex the Zn-I bond length is 2.90(1)Å. The Zn-O bonding distances in the complexes are approximately the same as that in the hydrated Zn²⁺ ion, 2.10(1)Å.